Yanhua Mini ACDP Key Programmer ,this is basic module ,but if you buy other adapter with authorization ,it will support CAS3/CAS3+/CAS4/CAS4+/FEM/BDC Key Programming (Add key/All keys lost) by OBD without soldering/welding. Supports Read and Write ISN Code by OBD as well.
Yanhua Mini ACDP Key Programming Master
Yanhua Mini ACDP Support 93 /24/ 25 / 35/ 95 Series EEPROM in circuit programming (ICP) and on adapter board programming (OBP), and parts of Freescale / NEC MCU in circuit programming (ICP). This host is a necessary basic configuration for other modules.
BMW CAS-CAS3+ Key Programming by OBD (Buy SK247-1 Module Seperatly):
Read CAS EEPROM
Back up or recover CAS
All keys Lost
BMW CAS4/CAS4+ (Buy SK247-1 Module Seperatly):
Read CAS4 EEPROM without soldering/welding
Add Keys without soldering/welding
Reset Mileage without soldering/welding
Back up or recover CAS without soldering/welding
All keys Lost without soldering/welding
FEM/BDC (Buy SK247-2 Module Seperatly):
All keys lost without soldering/welding
Add keys without soldering/welding
Delete Keys without soldering/welding
Enable/Disable keys without soldering/welding
Read Key ID
Repair/Replace FEM Module without soldering/welding
Reset Mileage without soldering/welding
Read and Write ISN Code (Buy SK247-3 Module Seperatly):
N20(mevd1724, mevd172P, mevd1729), N13(mevd1725, ), N55(mevd172, mevd1726, mevd172G, mevd172S, MEVD17, ), MSV80, MSD81, MSD85, MSD85HY, MSD87, MSV90, MEVD1728(s63), mev1722, med172, mevd1727, dde701_edc17c50, BMSX….
BMW 35080, 35160DO WT Read & Write (Buy SK247-4 Module Seperatly)
Read and write BMW M35080, 35160DO WT etc EEPROM
Fujitsu CPU MB91F Read & Write Module (Buy SK247-5 Module Seperatly)
Supports Honda FIT, Vezel, Fifth generation Hyundai Sonata, Kia K3/K5 etc Fujitsu CPU MB91F series read & write function.
MQB/MMC Instrument Module (Buy SK247-6 Module6 Seperatly)
Support parts of VDO mileage adjustment of VW MQB platform via OBD,and Passat MMC (NEC D70F3525 + 95320) instrument adjustment after years 2015 by ICP mode.
Refresh BMW Keys Module (Buy SK247-7 Module7 Seperatly)
Refresh BMW E chassis/F chassis key to make BMW keys can be used repeatedly.
BMW FRM Programming Module (Buy SK247-8 Module8 Seperatly)
Read and write BMW FRM module (FRM Footwell module) 0L15Y chip EEPROM/FLASH data. Read and write 3M25J chip EEPROM/D-FLASH/P-FLASH data.
Land Rover Key Programming on KVM 2014-2018 (Buy SK247-9 Module9 Seperately)
Yanhua Mini ACDP Module9 Land Rover Key Programming Support KVM from 2014-2018 Add Key & All Key Lost
Yanhua Mini ACDP Module10 Porsche BCM Key Programming (Buy SK247-10 Module10 Seperately)
1. Free of disassembly, Solderless.
No need to remove components,
No need to cut the line, no risk of damage to the BCM computer board.
2. Set anti-theft data reading and writing, anti-theft data calculation, key programming in one.
3. The interface board replaces the welding wire, the pin connect with intelligent detection, and the data reading and writing is safe and reliable.
4. With the key refresh function, No longer afraid of loss caused by key be locked.
Yanhua Mini ACDP Highlights:
Test car NO longer needs engines
YANHUA car keys programming NO longer need soldering iron
Car locksmith NO longer needs soldering work.
The first in the world
Programming no need soldering
Yanhua Mini ACDP IMMO/Mileage Programming
No need to remove chip
No need soldering
No need to cut the line
No need to lift the pin
Yanhua Mini ACDP Operating System:
IOS System Requirement:
1. System Version: 9.0 or above
2. Cell Phone Models: iPhone 6 or above
3. Running Memory Ram: >2G
4. Storange Space rom: >1.5G
Android: Xiaomi, OPPO,Samsung etc Qualcomm chipset mobile phones (DOESN'T support Huawei)
Android System Requirement:
1. System Version: 5.0 or Above
2. Running Memory Ram: >2G
3. Storage Space Rom: >1.5G
Solder-free programming Data safety
ICP: Memory and MCU programming In Circuits
Yanhua Mini ACDP Functions
1. Memory programming:
Support 93/24/25/35/95 series EEPROM in circuit (ICP)and on board(OBP)programming and parts of Freescale/ NEC MCU in circuit programming(ICP).
2. BMW module programming:
(1) Support cas1-cas4+and FEM/BDC IMMO key programming, mileage reset, program recovery.
(2)BMW engine ECU data reading and ISN code reading
3. VW module programming. MMC instrument
4. Instrument mileage and airbag ECU reset/maintenance is under development.
5. BENZ. BMW Audi and various models are upgraded successively
A game changer for BMW Key Programming
1. CAS4/CAS4+ Key Programming Without Soldering or removing component.
2. FEM/BD.C Key Programming without Soldering/Welding
3. Read ISN Code from OBD Port directly(Partially)
1pc x ACDP Programmer Master
1pc x OBP+ICP adapter
1pc x Puncture socket
1pc x P8P ribbon cable
1pc x 8P cable
1pc x 20P cable
1pc x P CAN cable set
1pc x 12V power adapter
3pcs x paint surface cleaning needles (1.0mm,0.8mm,0.5mm)
Contact us:Whatsapp:+86 15696171935
Skype: buyobdtool.comIf you have any questions, do not hesitate to contact us.