OPCOM 2014 diagnostic tool for Opel
1.Covers almost all cars for Opel, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
2.opcom 2014 lets you read and clear fault codes, support many control units.
3.Software version: 2014 Hardware Version: 1.59
Opcom OP-Com 2014 V Can OBD2 For Opel Firmware V1.59
Top 4 Reasons to Get OPcom:
1. Software Version: 2014(Also has 2010 version in CD)
Hardware Version: 1.59
2. OP-COM - PC based diagnostic tool for Opel.
3. OP-COM is a PC based diagnostic program.
4. Support cars till 2014 year.
Our Opcom chip:
Notes for latest VAUX-COM_120309a.exe software:
1.Win XP,Win 7 system must install dotnetfx35_SP1 patch file,or the software can not install.
2.For win 7 system,please check by administrator mode,and please operate like the video in the CD.
OPCOM 2014 Function:
1. It covers almost all cars for opel, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
2. The program lets you to read out and clear fault codes, shows you live data, lets you to perform output test.
3. The program supports many control units, like Engine, Automatic Transmission, ABS, Airbag, Engine Cooling module, Instrument Cluster, Electronic Climate Control, Body Control Unit, just to name a few examples.
4. Since Opel uses many pin in the OBD connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
5. Fault codes will be shown with all available information
OPCOM 2014 Feature:
1) Full status information (Present, Not present, Intermittent)
2) You can print out, save, or copy the fault codes to any other application. From the fault codes window, you can go directly to the measuring blocks window.
3) The program shows you measuring block information on many control module, you can choose anything from the list on your own.
4) The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while newer Multec, or Bosch units are faster (using KWP-2000), and the newest CAN based control units are very fast!
You can also run output tests on many controllers.
HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
1. OP COM Interface
2. USB Cable
Contact us:Whatsapp:+86 15696171935
Skype: buyobdtool.comIf you have any questions, do not hesitate to contact us.