Launch CNC603A Fuel Injector Tester Ultrasonic Cleaner 4/6 Cylinder 220V/110V
Launch CNC603A 6 Cylinder Ultrasonic Fuel Injector Cleaner 4/6 Cylinder
Launch CNC603A Fuel Injector Tester Cleaner 220V New Arrival Launch Automotive, CNC-603 is an advanced electromechanical product, which can clean and test injectors by simulating engine working conditions. It can also perform cleaning on the injectors and fuel supply system on vehicle.
Top Resons to get Launch CNC603A Fuel Injector Tester:
1. Multi-language: English, Japanese, Russian, Korean, French, Portuguese, Italian, Chinese.
2. Support 4/6 cylinder injector Test
3. Support almost all 12V car petrol injector
4. Fuel Injector Cleaner Tester+220V Transformer
5. Vehicle Type: Heavy Duty/Commercial
6. Dismantle free cleaning, Uniformity/Sprayability test, Automaticlly Ultrasonic cleaning, Sealing test / Injecting flow test
7. Built in ultrasonice tank,more compact and easy to
1.Dismantle free cleaning
2. Uniformity/Sprayability test
3.Automaticlly Ultrasonic cleaning
4. Delicate appearance
6. Injecting flow test
7. Built in ultrasonice tank,more compact and easy to clean
1. Ultrasonic cleaning: To perform simultaneous cleaning on several injectors and to remove the carbon deposits on the injector completely.
2. Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the help of backlight. This test is also for reverse flush.
3.Leakage test: To test the sealing and dribbling conditions of injectors under system pressure.
4. Injecting flow test: To check the injecting amount of the injector in 15 seconds of constant injection.
5.Auto. test: To test injectors by simulating different working conditions.
6.On-vehicle cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle
1.Cleaning and Testing Sequences
It is recommended to carry out the complete cleaning and testing procedures in the following order.
Uniformity / Sprayability test;
Injecting flow test;
Select the corresponding parameter according to different test items and set it. See “V. Operation Processes” for details.
2. Cleanup after Operation
After the end of cleaning and testing, a cleanup should be done, which includes:
Press [Drain] button on the control panel to drain test solution to a fuel container.
Switch off the power switch and unplug the power plug.
Take out the ultrasonic cleaning pool and pouring out all cleaning fluid completely shown in Figure 4.2, and wipe the ultrasonic cleaning unit with a soft dry cloth.
Wipe the table top of the machine with a soft dry cloth.
To avoid volatilization, all the test solution in the fuel tank should be discharged. If it can be used again, store
it in a safe place. If it is dirty and cannot be used any more, dispose it according to relevant regulations.
3. Specifications: Working Environment:
Power: AC220V-127V，50Hz/60Hz 3Amax
Mechanical Power: 300W
Ultrasonic Cleaning Power: 100W
Speed Range for Simulation Test: 10～9990rpm (step: 10rpm)
Environment Temperature: 0℃~+45℃
Relative Humidity: ＜85%
Strength of External Magnetic Field: ＜400A/m
Open fires is strictly prohibited within 2m.
Timing Range: 1～9999s
Pulse Width Range: 0.5～25ms (step: 0.1ms)
Operating Volume: 3000ml
1- Pulse line; 2-Fuel distributor assembly; 3-Observation window tube; 4-Ultrasonic cleaner;
5-Control panel; 6-Power switch; 7-Fuel pressure gauge; 8-Quick Connector ; 9-Fuel pump;
10-Fuel drainage pipe; 11-Automatic cleaning oil return port
4. Language Selection
Method and Steps:
1) Move the cursor to the language selection icon on the main interface and press the knob to enter the
2) Turn the knob to select the corresponding language
There are English, Japanese, Russian, Korean, French, Portuguese, Italian, Chinese to choose from.
Audi, Australia Ford, Benz, BMW, Brilliance, Chevrolet, Chevy, Chrysler, Citroen, Dacia, Dadi, Daewoo, Daihatsu, Demo, Fiat, Ford, GM, Holden, Honda, Hyundai, Isuzu, Jaguar, Kia, Lancia, Land Rover, Mahindra, Maruti, Mazda, Mitsubish, Nissan, Opel, Peugeot, Porsche, Renault, Romeo, Rover, Saab, Seat, Skoda, Smart, Subaru, Suzuki, Tata, Toyota, Volvo, VW, Yamaha
1 set Launch CNC603C fuel injector tester cleaner machine
1.Our website is 11 years old, and always online.
2.We are professional with these tools and a reliable company.
3.There are professional engineers on our team.
4.We have our own manufacturer.
6.Many customers buy from us, just rest assured to buy in our webiste.
7.Items are very good quality.
8.We package our items safely and securely.
9.Safe purchase, and your privacy is secure.
10.We provide one year warranty and free technical services.
WeChat: seven424424 Whatsapp Group:LLnn0gcToGG2UjpHuZmcpG