March Sale US/UK/EU Ship No Tax 2023 FoxFlash FoxFlashR Full Version Super strong ECU TCU Clone and Chiptuning tool with Free Damos Support VR Reading with Free Toyota Lexus Adapter

Support Five Modes and Full System
 
1: OBD mode：(read the data from Diagnostic port, you need remove the ecu or tcu from car or open the ecu box, just read everything from car, we also support obd reading, we supply original file from our server, you can read it via obd reading. )
2: BENCH mode: we also call it service mode,  you can use this mode clone or backup all ecu data, read the internal flash and external flash and eeprom data, so you can save a lot of money for clone ecu and tcu , you also can clone tcu and chiptuning with this mode.
3: Jtag mode: open the ecu, and wire it or use ours adapter to connect ecu ways,some of denso ecu always need use this mode for reading and writing .
4: Boot mode: open the ecu and always can backup everything, read the flash and eeprom, you can save some ecu cause your obd write failed, or some others reason cause the ecu dead.
5: Full system: you can read and write by pinout for most of ecu and tcu.
6: BDM mode: some of the ecu need read and write in bdm mode, open the ecu and use ours adapter to connect it.






Support Multi-language

foxFlash supports multi-language: Italiano, English, Deutsch, Francais, Espanol, Polish, Portugues, Czech, Romana, Turkish.




Support Winols damaos
 
As we all know, winols damaos and A2L is very expensive ,we supply these to ours customer for free, so you can get it for chitpuning, dtc off, and so on.
 
Supported Control Units
We believe a control units list can be considered as a more safe approach to correctly target the overall tuning procedure due to the fact that a lot of brands offer identical car models & versions that share different Control Unit types.
 
Please note that foxFlash can help you select the right protocol with its auto-detection feature when identifying on most control units.

Support Vehicle Types: 
 
AUTO
CAMION
TRATTORI
MOTO
MARINE
BIKE
CAMBI AUTOMATICI






 
Product Functions:

ECU clone 
TCU clone
Chiptuning
Stage1-stage4
Vmax off
Adblue and SCR off
DPF  OFF
Flaps OFF
popbangs 
gearbox data to adjust LC
sport display
immo off
dpf off
dtc off
GPF/OPF Removal
DPF Removal
EGR Removal
DTC Removal
ADBlue Removal
HOT Start Fix
IMMO Removal
Readiness Calibration
Flaps / Swirl Removal
TVA Removal
Sport Displays Calibration
Cold Start Noise Reduction
Kickdown Deactivation
StartStop Disable
MAF Removal
Speed Limiter Removal
Torque Monitoring Disable
Burbles Activation
Popcorn Activation
EVAP Removal
Exhaust Flap Removal
SAP Removal
AGS Removal
BMS/BPCM
Lambda/O2 Removal
Launch Control
OBD Reading Protection
Boost Sensor Calibration
LC, AL and NLS for MED9.1
Checksum Fix
vmax, swirl off
restoring ECU or TCU factory setting service 
VIN fix (EEPROM support checksum, so you can easily change VIN then write back )
 

FoxFlash Update Information:

January 27, 2023
 
FoxFlash is now able to perform the Toyota Denso Gen1 (76F00xx) OBD read/write
FoxFlash is now able to perform the following operations:

• OBD Read
• OBD Write

On the following ECU reference:
Denso Gen1 (76F00xx)

• Hino 4.0 VVT-i 147ch
• Lexus/Toyota 2.5 205ch
• Lexus 200H (1.8 E-CVT) 99ch
• Lexus 220d 177ch
• Lexus 250 (GSE20) 200ch
• Lexus 300 (3.0 V6) 204ch
• Lexus 330 (3.3 V6) 230ch
• Lexus 350 (3.5i V6) 275/300ch
• Lexus 400h (3.3i V6) 272ch
• Lexus 430 290ch
• Lexus 450h (3.5i V6) 292/299ch
• Lexus 460h (4.6 V8) 247ch
• Lexus 600h (5.0 V8) 394ch
• Toyota 1.0 (1KR-DE) 64ch
• Toyota 1.3 VVT-i 87/100ch
• Toyota 1.6 VVT-i 132ch
• Toyota 1.8 VVT-i HSD/TS 99/129/133ch
• Toyota 2.0 (1AZFE) 145ch
• Toyota 2.0 D4-D 116/126ch
• Toyota 2.0 DOHC 16v 156ch
• Toyota 2.0i 150ch
• Toyota 2.2 D4-D 136/150/177ch
• Toyota 2.4 (2AZFE) 160ch
• Toyota 2.5 205ch
• Toyota 2.5 D4-D 101/125/144/150ch
• Toyota 2.7i 161/188ch
• Toyota 3.0 D4-D 172ch
• Toyota 3.5 (2GRFE) 270ch
• Toyota 3.5i V6 266ch
• Toyota 4.0 V6 239/249/260/273ch
• Toyota 4.3 VVT-i 300ch
• Toyota 4.5 D4-D 272ch
• Toyota 4.5 V8 D4-D 198ch
• Toyota 4.6i VVT-i D-45 314ch
• Toyota 4.7 V8 280/288ch
• Toyota 5.0 VVT-i 295ch
• Toyota 5.7i VVT-i D-45 286ch
• Lexus GS 300
• Lexus GS 350
• Lexus IS-F
• Toyota Prius
• Toyota RAV 4
• Toyota Sequoia
• Toyota Tacoma
• Toyota Tundra
• Toyota Verso
• Toyota Auris
• Toyota Auris
• Toyota Avensis
• Toyota Camry
• Toyota Corolla (Verso)
• Toyota Crown
• Toyota Dyna
• Toyota Estima
• Toyota FJ Cruiser
• Toyota Fortuner
• Toyota Hilux
• Toyota Land Cruiser
• Toyota Mark X
• Toyota Optimo

ECU UPDATE New Protocols for Bentley Skoda (BOSCH )

Today we added multiple protocols for Bentley, Skoda, Honda, Volvo, etc. More info on supported ECUs and cars can be found below.
SUPPORTED CONTROL UNITS & VEHICLES
BENCH /BOOT/OBD
BOSCH
BAIC Bosch ME17.8.8 TC1728: Senova x25 1.5 VTI (2016), Senova X35 1.5 VTI (2016) , BJ20 1.5 VTI (2016)(BOOT)
Honda Bosch ME17.9.55 TC1724: City/Jazz/BRIO/FIT 1.2L i-VTEC (2014)(BOOT)
Mahindra Bosch EDC17C53 TC1767: XUV500 2.2 CRD (2014)(BENCH BOOT)
Bentley Bosch MG1CS163 TC298: Continental GT W12 6.0 (2018)(BENCH)
Volvo Bosch EDC16C34 MPC562: V70/S80 1.6D (2010)(OBD BENCH JTAG)
Skoda Bosch MED17.1.27: Fabia 1.0 TSI (2017)(OBD BENCH BOOT)
Bentley Bosch MED17.1.62: Bentayga W12 6.0 (2016)(BENCH BOOT)

BMW MSV90 Protocols BOOT Mode

This time it is for BMW cars with Siemens MSV90 TC1796 ECU. More info on supported cars can be found below.
SUPPORTED CONTROL UNITS & VEHICLES
BOOT
SIEMENS
MSV90 TC1796
CARS:
BMW 5 Series F10 – 530i N53B30A/N52B30B
BMW 5 Series F11 – 530i N53B30A/N52B30B
BMW 7 Series F01 – 730Li N52B30A/N52B30B
BMW 7 Series F02 – 730Li N52B30A/N52B30B
BMW X3 Series F25 – 28i xDrive N52B30A/N52B30B

Delphi DCM6.2AP DCM6.2A DCM6.2C DCM6.2V 

FoxFlash is now able to perform the following operations:

DCM6.2A/C/V
OBD Read
OBD Write
JTAG_BOOT

DCM6.2APJTAG_BOOTOn the following ECU reference:

Hyundai
Audi
Citroen
Fiat
Kia
MAN
Peugeot
VW
Toyota
Ssangyong

January 26, 2023

FoxFlash Can Support AUDI VW Group TCU DQ250C/E/F OBD virtual read/write-BENCH Read&Write
FoxFlash is now able to perform the following operations:
OBD Virtual Read
OBD Write
BENCH Read
BENCH Write
On the following TCUs:
Temic DQ250C
Temic DQ250E
Temic DQ250F
Vehicles concerned:
AUDI/SKODA/VAG 2.0 TSI/TFSI
AUDI/SKODA/VAG 2.0 TDI CR

January 20, 2023
 
– BENCH MODE BY PROCESSOR INFINEON TRICORE TC1782
With this update you will be able to fully read and write the following ECUs directly
From pinout without having to open them:
– VAG GROUP VW-AUDI-SEAT-SKODA: MED17.5.21, MED17.5.25
– FORD: MED17.0.7
– NISSAN: EDC17 C84
– RENAULT: ME17.9.20, EDC17 C84
– TOYOTA: MED17.9.52, EDC17 C47

January 16, 2023

EXTRACT PASSWORD FROM FILE 

– NEW DRIVERS TO EXTRACT PASSWORDS FROM FILES

New utilities useful for extracting the password by loading a Tricore processor file.
As of now, the software will also save the tricore password locally for each Tricore processor reading.

FULL SYSTEM FOR TCU TEMIC 6T50 OPEL, CHEVROLET

– Complete reading and writing of Micro,
– Complete reading and writing of EEPROM,
– Cloning
– RIVERGIN function

Package Includes:
Hardware:
 
1pc x Master machine 
1pc x Fox bench box
1pc x USB cable 
1pc x Power adapter
1pc x Fox box store over 10 adpaters 
1pc x Jtag and bdm cables
1pc x Pen 
1pc x Notebook
1pc x Suitcase
1pc x Function cable for boot, bench, kline links .
1pc x Truck OBD cable
1pc x Car OBD cable
1pc x Paper box 
1pc x Install guide 
 
Software:
 
1pc x  Main software
1pc x  Technical Support
1pc x  Login account for software and tools
1pc x  PDF pacakges for connecting ecu and tcu
1pc x Join facebook group for support 
1pc x Online chat support for use
 
Extra pacakge according to users request after the user get the tool.
 
1pc x Tuner account
1pc x Helpdesk
1pc x WinOLS damaos, A2L 










We strongly recommend users to use online mode. The reasons are as follows:
 
1: We can help you check if your file is correct online.
2: The autochecksum can work online check too.
3: It is safer.
4: The online mode can check if your modifying is correct. If not, we can help to solve the problem.
5: The online mode can auto VR read and write from our server, which mean you can get the original file, and we can help you recover or save your broken ecu.
 
BTW, if you want to go out or work outside with our tool, just use your phone to turn on a hotpot, ours tool can work with hotpot. You will NOT need any VPN, for we have a wordwide server. No matter where you are, you can connect us.
 
The online work is easier and safer. Please do NOT let your ecu become a brick without using the online mode.