WIFI ELM327 Wireless OBD2 Auto Scanner Adapter Scan Tool for iPhone iPad iPod
WIFI ELM327 Specifications:
Range: 50 ft (Line of sight)
Power Consumption: 0.75 Watts (With Power Switch)
Wifi Standard: 802.11a/b/g
Operating Temperature: -15 to 100 Deg Celsius
Plastic: Automotive Grade
Physical Dimensions: 2.75 x 1.25 x 1.2 inches
WIFI ELM327 Features:
CLK is capable of communicating with vehicles which adopt following protocols:
ISO 11898(aka. CAN)
ISO 14230(aka. KWP2000)
ISO 15765(aka. CAN)
WI-FI OBD AUTO CHECKER is able to detect and interpret these protocols automatically. It also provides support for high speed communications and a low power sleep mode. It use AT commands to communicate with a host device (PC, notebook, iPhone, iPod touch, iPad and so on). There are plenty of software packages available, which are fully compatible with WI-FI OBD AUTO CHECKER. Some of them have pretty useful features, such as engine running parameters monitoring, DTC reading and clearing, MPG meter, etc. You can even write your own software on a specified hardware platform if you wish, because the AT commands are fully documented and very well explained.
WI-FI OBD AUTO CHECKER is measuring only 2.7 x 1.25x 0.9 inches.It comes included with a power switch built-in to prevent the need for having to constantly disconnect your unit from the OBDII port. It is compatible with 1996 and later vehicles. Connecting to your iPhone / iPod touch /iPad is made by WIFI connection in adHoc mode.
Elder OBD compatible vehicles has a sticker indicates that the vehicle is OBD compatible. Model year 1996 and newer vehicles are compliant by default, and will not have this sticker.
Following are Some of The Parameters Which Could be Read From the Vehicle:
Engine Coolant Temp
Calculated Engine Load
Intake Manifold Pressure
Air Intake Temp
Mass Air Flow
EVAP System Vapor Pressure
1 x ELM327 WiFi Wireless OBD2 Interface
1 x Software CD
Where to get WIFI ELM327 software?
You can log on to the apple application store to get your commercial/free software.
There is a freeware in the CD-ROM comes along with the device. You can use this piece of software to config and test the WIFI327.
After the installation of ScanMasterELM_DEMO, there would be a shortcut on the desktop.
You need to config your PC or cellphone before you can use this software.
For example, on a PC you should follow the steps shown in the pictures below:
IP address setting.
After this, click OK. You can find the Wifi327 device in the window shown below.
Click Connect to connect your PC to Wifi327.
Now the configuration of your PC is done. You can start to use the software.