6.Support ECU of vehicles like CUMMINS/Bosch/DELPHI
Fcar F502 code reader Functions
Axle, Power Unit
Brakes, Power Unit
Brakes, Trailer #1
Fcar F502 Parameters:
Screen size :2.8 inch 320×240 LCD
Work voltage:8V ~ 32V
Work current :Typical value <100mA
Connection method :Standard 16-PIN OBD diagnostic connector
Working temperature :0℃~ 50℃
Storage environment temperature: -20℃~70℃
Relative humidity: 60%
Weight of the main unit: 280g
Fcar F502 Firmware Display:
1.OK diagnosis normal indicator light: The indicator light is on in communication diagnosis.
2.OK diagnosis failure indicator light: The indicator light is on when there is a failure of communication diagnosis;
3.Voltage indicator light: The indicator light is on when the machine is connected to OBDⅡ diagnostic sockets.
4.Diagnosis communication line, which should be connected to OBDⅡ diagnostic sockets on the vehicle;
5.Up and down buttons
6.Enter: The button for confirmation;
7.USB data line interface: Backup interface for data connecting;
8.Exit: The button for cancellation and back.
F502 Operation Methods
1.When the MIL of the engine of the vehicle with standard OBDⅡ diagnostic socket is lightened up, you must stop the vehicle as well as hold the brake, turn the key ignition to ON and then insert the FCAR code reader into 16pin diagnostic socket of the vehicle; standard OBDⅡ diagnostic socket generally is set below the steering wheel at the driver side.
2.After being connected to diagnostic socket, FCAR reader will start automatically and display the logo of FCAR. A few seconds later, you will enter diagnosis interface and choose the function you want. If you want to do diagnosis, please choose "Diagnostics" and enter it by clicking the key "Enter".
3.Vehicle diagnosis：Here, you can see the communication protocol available for standard OBDⅡdiagnosis of gasoline vehicle, and choose the item according to the actual conditions of the vehicle.
4.After you enter the system, you can read fault code, erase fault code and read data stream and others (When the content of the menu exceeds the largest part that the interface is able to display, you choose the item by clicking up and down buttons). If there is communication failure prompted during the diagnosis, please check whether key switch is turned on or not, the diagnostic protocol selected is right or wrong and diagnostic socket on the vehicle has signal voltage or not, etc.
1*Main unit of code reader
1*Diesel-6(Note:This connector is only limited to F502)
1*Diesel-9(Note:This connector is only limited to F502)