ECU Chip Tunning Tool
ECU chip tuning tool is used for reading and programming ECU content of eeprom file (or ROM memory with maps if eeprom physically not present). We have universal ECU programmers like Ktag,Kess V2,Fgtech galletto,MPPS tuning tool, Xprog-m, UPA USB programmer, BDM100 and special ECU flasher for BMW (BMW carsoft 6.5), VW, Audi, Skoda, Jetta, Fiat, and so on.
V80 Iprog+ Pro car key programmer,it can also support Airbag,carradio,dpf off, ECU,IMMO KEY, MIL TO KM, PINABS,PINCODE SMATRA3,PINCODE SENSOR SPEED LIMIT,ODO Adjust,EEPROM,MCUAtmel,Fujutsu,Microchip,Motorola,Motorola912EN,NECV850,BLR,CAN,CRC-Cript,ibutton,sd-unlocker,test.Supports vehicles till year 2019.
Newest MPPS V16.1.02 is professional ecu chip tuning tool, it is completely working through obd2 port, no need soldering or connecting cables, easy and high efficiency.
1. With latest Firmware version: V7.020
2. Add ECU Type: Toyota 76FXXX, PSA 17.4.4, Ford E83, VW 17.5.5 (1766), Mercedes-Benz 276ECU,Toyota 76F, and so one, at least 100 more ECU Types
3. No tokens limitation
V80 Iprog+ Pro with 7 Adapters Support IMMO + Mileage Correction + Airbag Reset
V80 Iprog+ is super powerful.
1.FG Tech Galletto 2-Master V54 BDM-OBD is a famous chip tuning tool for all cars, trucks, motorcycles, Marine, BDM MPCxx, checksum.
2.This item cannot only work as fgtech galletto 4-Master, but can also work for BDM-OBD.
Super Piasini Master V4.3 can read all dump of chip by bin file and you can write or edit dump yourself. It is updated version for V4.1, support more vehicles.
1.Orange 5 is a professional programming device for memory and microcontrollers.
2.Unique feature of the current series programmers is built-in macro language for writing down protocols.
3.Full package include 24 adapters.
FG Tech Galletto 4-Master V54 BDM-OBD is a famous chip tuning tool for all cars, trucks, motorcycles, Marine, BDM MPCxx, BDM Boot Mode, checksum. This item can work as FGTech Galletto 4-Master,also work for BDM-OBD.
Plug and Drive NitroOBD2 Chip Tuning Box for Benzine Cars
35% More Power, 25% More torque
NitroOBD2 is a Plug&Drive Ready device to function the increasing the performance of engine.
NitroOBD2 is easy to install. Just plug it into the OBD2 connector of cars. NitroOBD2 fits all car from the year of 1996.
MPPS V13.02 is the latest Version. The modern interface that allows read and write memory from the car computer via the diagnostic connector. Supports the latest drivers EDC16, EDC17, MED9.x, Siemens PPD1 / x, EDC15, ME7.xi much more ... Professional performance, without unnecessary boxes and cables. All electronics in OBD2 connector.
Requires Windows XP sp2. MPPS V13.02 can support multi-language.
Xprog V5.84 adds new authorizations: AUTH-0028-1 Renesas V850 Authorized and AUTH-0028-2 Renesas SuperH Authorized 2017/10/9
DS17 Infineon Tricore Boot Reader is an updated version for BDM100, it takes direct access on processor and EPROM memory of the ECU over a dedicated port like the BDM system
UUSP UPA-USB UPAUSB UPA USB Serial Programmer Full Package V1.3
Automobile Sensor Signal Simulation Tool MST-9000+
1. New update version: 2012 MST-9000+
2. It is an very useful tool for professional technician during car ECU reparing
3. It's has been the most fix purchasing equipment with advance technology for many workshop and automobile training school.
KWP 2000 Plus ECU REMAP Flasher Tuning Tool
With this tool,you can:
1. Read and analys your current ECU software;
2.Upgrad the ECU software with a re-mapped file ;
3.Repair ECUs with software problems or corruption
Hardware only bundle for Fiat ECU Scan software,compatible fully with fiateucscan. Not only do you get the 2 hardware interfaces required for full software coverage, but we include specific break-out adaptor cables for supported Airbag, ABS, Power Steering and CAN systems, so there's no need to modify your interfaces.
Vagtacho USB Version V 5.0 VAG Tacho For NEC MCU 24C32 or 24C64