MB EIS Repair Tool l used to repair Benz key failure that intermittently or permanently can not turn ignition on, including the key twist fixed, the key data code hopping, remote control can not be used, the ignition lock (EIS) can not diagnose and so on.
With X-200, Without worries about resetting!
X-200 is a kind of professional hand auto maintenance resetter, including CBS and OIL resetting, tire pressure alarm lamp resetting(by hand),timing belt CBS reset(by hand),obd-Ⅱ engine diagnosis, brake pad changing of EPB Electronic Brake and other functions for resetting.
Support the newest cars with CAN BUS and UDS agreements.
This innovative NT630 ABS and Airbag Reset Tool does not only have extensive coverage of vehicles but also provides accurate and professional diagnosis of ABS and airbag faults.
W211/R230 ABS/SBC TOOL (Repair Code C249F) for Mercedes Benz cars have W211 and R230 with ABS SBC system.
Special BDM+3 Adapter for CG100 Airbag Restore Devices Renesas
CG100 software version over 3.0, must use this new BDM+3 Adapter to update.
This reset tool has been developed with "Long Life Oil" service interval functionality. In addition to service light reset, the tool extinguishes the airbag (SRS) warning lamp across the complete VW/Audi range of vehicles.
SI-Reset V-A-G OBD2 Workable with VW, AUDI, FORD, Seat & Skoda Cars with OBD2 connector (w/o can bus). Reset Inspection Intervall.
We supply SI-Reset VAG with unlimited technical support.
SI-Reset Tool For Opel OBD2 works through obd2 connetor and mainly support old cars.
MB SBC Tool ABS/SBC System Repair Tool for Mercedes using DAS to check and diagnose the ABS/SBC system in Mercedes Benz's W211 and R230, these faults will be showed: CODE C249F, OPERATING TIME OF COMPONENT A7/3 IS EXCEEDED (SBC HYDRAULIC UNIT).
We supply SBC Tool ABS/SBC System with unlimited technical support.
EPB & Service Reset Tool For Landrover Range Rover,ompatible with latest CAN vehicles.
The new Landrover service tool has been designed not only to extinguish service indicators, but to provide electronic park brake functions such as releasing the park brake cable allowing the brakes to be changed
New CG100 Airbag Restore Devices Support Renesas ,Including all function of XC236x FLASH Programmer and Renesas Repair function.Full support for CPU airbag computer repair.
Software adopt to operate interface with wizard-style, data arbitrarily rewrite, MCU pin identification and detection
SBC TOOL W211/R230 For Benz ABS/SBC TOOL
Oil / Service Reset Tool OT902 is specially designed to reset oil service light,oil inspection light, service mileage, service intervals on most OBDII/EOBD major Asian, American and European vehicles without using the OEM scan tool. Save money on expensive garage charges with this ergonomic reset tool!
AutoEnginuity Service Reset Tool will allow you to perform the BMW Ser-vice Inspection Rest (SIR) and Conditional Based Service (CBS) Oil Service reset and will also allow you to perform the battery replacement registration as required for late-model BMW battery replacement.
Main Test Cable for BENZ SBC TOOL W211/R230 ABS/SBC TOOL
CAN Adapter work with CG100 PROG III , Repair ECU, Read and Write ISN , support MT80 ,MT60,B-M-W,A-UDI.VW. It CANNOT Work Alone<br /><br />
The ATM adapter suppports:
- 35080 35160 DQW080 DQW160 35080V6 VP,
- parallel FLASH Zhiwei anti-theft cancellation,
- 8-pin chip,
- ATMEGA re-use
Attention :The ATM adapter cannot be used alone; it must be used together with CG100 PROG III Airbag Restore Devices.
Diatronic DTR UART Adapter Diatronic CalC Tool, Works together with Diatronic, used to read renesas and infineon on circuit.
Diatronik Support all renesas and Infineon airbag restore by OBD2 up to 2016
Diatronik Support Dash mileage correction via OBD2
Diatronik Support Airbag Calculator via USB
Diatronik have many more function like OBDII Diag, IMMO Tool, G-Prog in develop, will add later.