UUSP UPA-USB UPAUSB UPA USB Serial Programmer Full Package V1.3
Hardware only bundle for Fiat ECU Scan software,compatible fully with fiateucscan. Not only do you get the 2 hardware interfaces required for full software coverage, but we include specific break-out adaptor cables for supported Airbag, ABS, Power Steering and CAN systems, so there's no need to modify your interfaces.
This CMD CAN Flasher V1251 read and write flash memory via the diagnostic connector on the CAN line of computers with motor MED9.1, MED9.5, EDC16U3x/CP, EDC16CP31, EDC16CP36, EDC16C3 and EDC16C9 fuel injection. Working through CAN, not on K line.
Micronas and Fujitsu Programmer 2.0 For Audi VW replace R200 and R250 fully
We supply Audi VW micronas /Fujitsu programmer with unlimited technical support.
This Tool is a frequency sweeper with 5V square wave output (Duty cycle 50%, effective frequency range from over 10kHz (max 50kHz) to 50Hz) .This tool can be also considered as a MCU version of the software TMS-374 Decoder ECU. The only difference between the two tools is that the MCU version works without a PC.
D80D0WQ ERASER/Programmer was used to Read, Program, Erase Incremental Registers\EEPROM. Compatible with Windwos 98/2000/XP
Powergate is the most versatile device ever created for serial programming via diagnostic plug. By using all the newer protocols of communication (K-LINE, CAN and J1850), Powergate can read and write the Electronic Control Unit of many vehicles on the market.
FGTech Galletto 2-Master this new system developed with high-speed USB2 technology is the fastest and most secure product on the market, it is easy to install and use by anyone.
BDM100 ECU chip tuning tool is a universal reader/programmer (it does not require our RACE software necessarily) that allows the user to read and program files in the ECU supplied with MOTOROLA MPC5xx processor (essential).
Moreover, we supply the bdm 100 unlimited technical supports with free; our price of bdm 100 is reasonable and competitive.
MAGPro2 is a chip tuning system composed of several modules. Serial OBDII programming tool that allows the communication with a vast number of vehicles, allowing the reading and writing through the use of simple connections with simple and fast software.
We supply the MAG PRO2 with unlimited technical support and competitive price.
The WELLON Programmers are affordable, reliable, and fast universal device programmers. They are designed to operate with the Intel Pentium-based IBM-compatible desktop computers and laptops. No interface card is necessary to plug the module into a PC (this feature is especially handy for laptop users). The menu-driven software interface makes them easy to operate.
We supply Wellon programmer with unlimited technical support.
UUSP UPA-USB UPAUSB UPA USB Serial Programmer Full Package V1.2 B Yellow Color
The XProg-m programmer is designed to replace the earlier version of XProg-M programmer.It is fully upward-compatible hardware with XProg-M programmer and have many additional features.
EDC16 ECU Flasher V 3.1.1236
ECU flash reading/writing over diagnostic socket for a wide range of ECU units.
WELLON VP380 Programmers are affordable, reliable, and fast universal device programmers. VP-380 is designed to operate with the Intel Pentium-based IBM-compatible desktop computers and laptops.
We supply Wellon VP-380 with unlimited technical support.
MPPS SMPS V12 ECU Chip Tuning Tool For EDC15 EDC16 EDC17 is a USB chip Tuning interface. This is good clone working with V12 version of software.This interface lets you to read and write memory of a car computer through the diagnostic connector.
ECU Reader is an advanced tool for cars motor ECU internal EEPROM reading, writing and coding by OBDII connector.Compatible vehicle list:VW group(including VW, AUDI, SKODA and Jetta),