Newest MPPS V16.1.02 is professional ecu chip tuning tool, it is completely working through obd2 port, no need soldering or connecting cables, easy and high efficiency.
KTMflash Read the chip data, change the computer, read transmission data etc, the speed is very fast.
Super Piasini Master V4.3 can read all dump of chip by bin file and you can write or edit dump yourself. It is updated version for V4.1, support more vehicles.
FG Tech Galletto 4-Master V54 BDM-OBD is a famous chip tuning tool for all cars, trucks, motorcycles, Marine, BDM MPCxx, BDM Boot Mode, checksum. This item can work as FGTech Galletto 4-Master,also work for BDM-OBD.
K-TAG ECU Programming Tool
1.It is designed entirely around the needs of our customers to be more responsive and reliable.
2.A true champion of innovation, K-TAG introduces another brand new novelty to Alientech world: J-Tag communication for Asian vehicles.
update by email
DS17 Infineon Tricore Boot Reader is an updated version for BDM100, it takes direct access on processor and EPROM memory of the ECU over a dedicated port like the BDM system
UUSP UPA-USB UPAUSB UPA USB Serial Programmer Full Package V1.3
Hardware only bundle for Fiat ECU Scan software,compatible fully with fiateucscan. Not only do you get the 2 hardware interfaces required for full software coverage, but we include specific break-out adaptor cables for supported Airbag, ABS, Power Steering and CAN systems, so there's no need to modify your interfaces.
KWP 2000 Plus ECU REMAP Flasher Tuning Tool
With this tool,you can:
1. Read and analys your current ECU software;
2.Upgrad the ECU software with a re-mapped file ;
3.Repair ECUs with software problems or corruption
This CMD CAN Flasher V1251 read and write flash memory via the diagnostic connector on the CAN line of computers with motor MED9.1, MED9.5, EDC16U3x/CP, EDC16CP31, EDC16CP36, EDC16C3 and EDC16C9 fuel injection. Working through CAN, not on K line.
MC68HC11 Motorala 711 Programmer communication with PC via a serial port ,it is easy to use Windows 98/ME/XP software In-circuit/On-board.
Micronas and Fujitsu Programmer 2.0 For Audi VW replace R200 and R250 fully
We supply Audi VW micronas /Fujitsu Programmer with unlimited technical support.
This Tool is a frequency sweeper with 5V square wave output (Duty cycle 50%, effective frequency range from over 10kHz (max 50kHz) to 50Hz) .This tool can be also considered as a MCU version of the software TMS-374 Decoder ECU. The only difference between the two tools is that the MCU version works without a PC.
Galletto 1260 RL232 imported chips is an easy hardware for auto chip tunning. It is compatible with the newest modern diesel TDi, HDi, JTD, and petrol cars.
Supported Languages: English, Spanish, French, German, Italian, Portuguese
M35080V6 EEPROM ERASER/PROGRAMMER
1.Used to read, program, erase Incremental Registers\EEPROM.
2.In-circuit/On-board EEPROM programming.
D80D0WQ ERASER/Programmer was used to Read, Program, Erase Incremental Registers\EEPROM. Compatible with Windwos 98/2000/XP
TOP3100 Universal Programmer for Windows7/Vista/Xp 32bits
912 9S12 Programmer For Motorola Free Shipping